Îñîáåííîñòè:

• Texas Instruments IEEE 1394 chipset on-board. 

• Compliant IEEE 1394 and compatible with proposal 1394A. 

• Supports up to 63 devices that can be run simultaneously on a system. 

• Support 1394 Transfer Rate for 100Mbit/sec, 400Mbit/sec. 

• Provides PCI Bus Master function for supporting DMA operations.

• Provides PCI Slave function for read/write access of internal Registers. 

• Programmable 5 channel address comparator logic for receiving incoming 1394 packets and assigning them to a DMA channel. 

• Provides a programmable 8/16-bit external Local Bus for implementing a dedicated data to external logic. 

• Operates from a 3.3V power supply while maintaining 5V tolerant input. 

• Perform 32 bit CRC checking on reception of 1394 packets. 

• Support DMA transfers between 1394 and local bus RAM, ROM, AUX or ZV. 

• Implements a 32-bit PCI address-data path. Provides PCI address-data parity checking 

• Serial ROM Interface Supports 2-Wire Devices. 

• 32-bit PCI Bus Master design. Provides Four General Purpose I/Os. 

Îñîáåííîñòè:

• PCI Bus Burst Mode up to 133MB/S

• Texas Instruments OHCI-Lynx Chip built-in

• FireWire Speed up to 400Mbps (=50MB/S)

• Supports USB2.0 and EHCI Specifications

• 3 external and 1 internal USB2.0 connectors, 480Mbps data rate

• 2 external and 1 internal IEEE1394 connectors

• Supports "hot swapping" and "plug-and-play"

IEEE1394 FireWire Ports

• Provides 2 IEEE1394 ports (2 external, 1 re-routed to internal), Connects up to 63 devices.

USB Ports

• USB2.0 EHCI Compliant, compatible with existing USB1.1 devices

• Integrates seamlessly with other USB2.0 devices and HUB-based products

Data Transfer Rate

• 400Mbps IEEE1394 FireWire Transfer Rate

• 480Mbps USB2.0 and 12Mbps USB1.1 Transfer Rate

I/O Hardware

• 2 external, 1 internal 1394 connectors

• 3 external and 1 internal USB connectors

OS Support

• Supports Windows 98, Win98SE, Windows2000, Apple MAC OS 8.6, OS9